公司业务
星光公主的水晶时代2RFMV5X series five axis vertical machining center
星光公主的水晶时代2RFMV5X series five axis vertical machining center
立式加工中心系列
星光公主的水晶时代2RFMV5X series five axis vertical machining center
产品简介
采用高刚性小龙门立壁框架箱式对称结构,工作台直接支承在床身导轨上,整机刚性强。
The high rigidity small double column vertical wall frame box type symmetrical structure is adopted, and the workbench is directly supported on the bed guide rail, so the whole machine has strong rigidity.
结构特点
规格参数
  • 1. 采用高刚性小龙门立壁框架箱式对称结构,工作台直接支承在床身导轨上,整机刚性强。 

    2. 主轴采用台湾梳格高速电主轴,最高转速可达36000rpm;电主轴轴承采用油气润滑,主轴外套采用恒温冷却,确保主轴运行稳定可靠。

    3. X、Z轴导轨采用日本THK的SRG滚柱导轨,Y轴导轨采用THK的NRS滚珠导轨。

    4. 三轴丝杆均采用日本THK的高速精密丝杆,采用预拉伸结构和FAG精密轴承支承。

    5. 配置摇篮式双轴高精度数控回转台,可进行空间复杂曲面精密加工。

    6. 机床X轴防护罩采用高速风琴防护罩结构,Y轴采用不锈钢带连杆机构的高速防护罩结构,Z轴防护罩直接用钣金罩防护,三轴坐标快速移动速度最高可达48米/分。

    7. 机床排屑采用床身两侧螺旋式自动排屑加后端链板式自动排屑的方式。

    8. 刀库标准采用ATC高速机械凸轮式刀库,多种刀库供选。

    9. 标配刀具外冷系统和床身冲屑装置。

    10. 主轴选配中心冷却系统 ,中心出水压力可达20ba.

    11. 选配三轴海德汉光栅尺。

    12. 标准系统配置为FANUC31i-MA系统,多种系统供选择。

    1. the high rigidity small double column vertical wall frame box type symmetrical structure is adopted, and the workbench is directly supported on the guide rail of the bed. The rigidity of the whole machine is strong.

    2. the spindle adopts Taiwan comb grid high-speed motorized spindle, and the maximum speed can reach 36000rpm; The electric spindle bearing is lubricated by oil and air, and the spindle outer sleeve is cooled by constant temperature to ensure the stable and reliable operation of the spindle.

    3. The x-axis and z-axis guide rails adopt Japan THK SRG roller guide rails, and the y-axis guide rails adopt THK NRS ball guide rails.

    4. the three-axis screw rod adopts the high-speed precision screw rod of Japan THK, and adopts the pre stretching structure and fag precision bearing support.

    5. it is equipped with a cradle type double axis high-precision CNC rotary table, which can carry out precision machining of spatial complex surfaces.

    6. the x-axis protective cover of the machine tool adopts the high-speed organ protective cover structure, the y-axis adopts the high-speed protective cover structure of stainless steel with connecting rod mechanism, and the z-axis protective cover is directly protected by the sheet metal cover. The rapid movement speed of the three-axis coordinate can reach up to 48 m / min.

    7. the machine tool adopts the method of screw type automatic chip removal on both sides of the machine body and rear chain plate type automatic chip removal.

    8. ATC high-speed mechanical cam type tool magazine is adopted as the tool magazine standard, and a variety of tool magazines are available.

    9. tool external cooling system and bed chip punching device are standard.

    10. the main shaft is equipped with a central cooling system, and the central water outlet pressure can reach 20ba

    11. three axis Heidenhain grating ruler is selected.

    12. the standard system configuration is fanuc31i Ma system, and a variety of systems are available for selection.


  • 规格
    RFMV60-5XP
    工作台直径table diameter Φ540mm
    工作台最大承重(水平0°)Max load (horizontal 0° )400KG
    工作台最大承重(倾斜0°-90°)Max load (declining 0°-90° )120KG
    A轴摆动范围 A axis angle range ±130
    C轴回转范围 C axis angle range 360
    横梁前后移动距离(Y轴)Yaxis 1000mm
    滑板左右移动距离(X轴)Xaxis 650mm
    滑枕上下移动距离(Z轴)Zaxis 450mm
    A/C轴驱动方式 A/C axis driven way 力矩电机直驱Torque motor direct drive
    A/C轴扭矩 A/C axis torque 1758/600Nm
    主轴端面至工作台面距离 Distance from Spindle Face to Table Surface 最大 max 690mm 最小 min140mm
    锥孔taper 140mm
    最高转速 Max speed 18000r/min
    额定扭矩 rated torque 67Nm
    额定功率 rated power 28KW
    切削速度Cutting feed rates X,Y,Z轴 1-10000mm/min A、C轴 40/60rpm
    快移速度Cutting feed ratesX,Y,Z轴 48/40/48mm/min A、C轴 40/60rpm
    最小分辨率Min resolutionX,Y,Z轴 0.0001mm/min A、C轴 0.0001
    刀库容量tool capacity 30把
    刀库形式ATC type 链式无手刀库Chain type handless tool magazine
    刀柄形式tool shank HSK-63A
    刀具最大重量 Max tool weight 8kg
    刀具最大直径Max tool diameter 75(满刀状态)(full position)
    机床定位精度position accuracyX,Y,Z轴 axis 0.005mm
    机床定位精度position accuracyA,C轴axis 6″
    重复定位精度repeating accuracyX,Y,Z轴axis 0.003mm
    重复定位精度repeating accuracyA、C轴axis 4″
    全闭环控制Full closed loop controlX,Y,Z轴axis 标配standard
    全闭环控制Full closed loop controlA、C轴axis 标配standard
    数控系统control system SIEMENS 840DSL
    总用压缩空气量 total air volume 600L/min
    压缩空气压力air pressure 0.65MPA
    RFMV80-5XP
    工作台直径table diameter Φ630mm
    工作台最大承重(水平0°)Max load (horizontal 0° )500KG
    工作台最大承重(倾斜0°-90°)Max load (declining 0°-90° )150KG
    A轴摆动范围 A axis angle range ±130
    C轴回转范围 C axis angle range 360
    横梁前后移动距离(Y轴)Yaxis 1200mm
    滑板左右移动距离(X轴)Xaxis 800mm
    滑枕上下移动距离(Z轴)Zaxis 550mm
    A/C轴驱动方式 A/C axis driven way 力矩电机直驱Torque motor direct drive
    A/C轴扭矩 A/C axis torque 1758/600Nm
    主轴端面至工作台面距离 Distance from Spindle Face to Table Surface 最大 max 690mm 最小 min140mm
    锥孔taper 140mm
    最高转速 Max speed 18000r/min
    额定扭矩 rated torque 67Nm
    额定功率 rated power 28KW
    切削速度Cutting feed rates X,Y,Z轴 1-10000mm/min A、C轴 40/60rpm
    快移速度Cutting feed ratesX,Y,Z轴 48/40/48mm/min A、C轴 40/60rpm
    最小分辨率Min resolutionX,Y,Z轴 0.0001mm/min A、C轴 0.0001
    刀库容量tool capacity 30把
    刀库形式ATC type 链式无手刀库Chain type handless tool magazine
    刀柄形式tool shank HSK-63A
    刀具最大重量 Max tool weight 8kg
    刀具最大直径Max tool diameter 75(满刀状态)(full position)
    机床定位精度position accuracyX,Y,Z轴 axis 0.005mm
    机床定位精度position accuracyA,C轴axis 6″
    重复定位精度repeating accuracyX,Y,Z轴axis 0.003mm
    重复定位精度repeating accuracyA、C轴axis 4″
    全闭环控制Full closed loop controlX,Y,Z轴axis 标配standard
    全闭环控制Full closed loop controlA、C轴axis 标配standard
    数控系统control system SIEMENS 840DSL
    总用压缩空气量 total air volume 600L/min
    压缩空气压力air pressure 0.65MPA